The craft of chair weaving and caning in particular has been performed for numerous centuries and is still a feasible craft today. The art is practiced the world over. Despite its old age, the techniques and even materials have not changed much, with only a few common equipment required to repair chair seats. This makes the it an art that almost anyone can master with just a little tenacity and patience. This article guides you through the insights on chair caning Chicago.
First it is worth knowing that different kinds of caning are regarded to be better than others and this play a big role in the aggregate cost of the chair. Due to the inherent characteristics of different weaving materials, there are those that are used for particular patterns. However, other materials are opted for other reasons.
To begin with, is the pressed cane and hand cane. The most common material for the weaving is a tall, perennial grass having woody stalks. It is this material that earned the process its name. Hand cane and pressed can are two distinct types of cane, though they closely resemble each other. The two are also used interchangeably to achieve a number of different patterns. The only disparity is that hand cane is woven by hand while pressed cane is done on a loom.
Wicker work is normally used in furniture and basket weaving. Cane on the other hand, is used the world over and is applied in weaving baskets for hampers, beautifying chairs using seagrass. It is also used in beds of varying sizes for children and adults, tables and cupboards of different sizes and shapes and for walking sticks.
The next step is to apply some glue into the groove. Do not use too much of it, but just enough to cover the very rattan webbing at the very bottom of the groove. Relax as you give the glue some time to settle. This takes about five minutes.
The splint read is a flat reed that is cut from the inside part of a rattan plant. The component is applied in making numerous weaves common with the binder type. It also allows for colored splint such as oak and ash splint materials.
The reed is processed into a round, flat-oval, flat and oval-oval reed which is then packaged into typical coils of one pounds each. Unlike the glossy cane skin, the reed is porous and does accept both paint and attain. The material is excellent for woven wicker, basketry and furniture alike.
Simply put, the materials used to make obtain the caning are wide and diverse. The range of patterns is also varied and can contain different colors. However, the particular type of component to be applied is dictated by the type of seat and the cost implications.
First it is worth knowing that different kinds of caning are regarded to be better than others and this play a big role in the aggregate cost of the chair. Due to the inherent characteristics of different weaving materials, there are those that are used for particular patterns. However, other materials are opted for other reasons.
To begin with, is the pressed cane and hand cane. The most common material for the weaving is a tall, perennial grass having woody stalks. It is this material that earned the process its name. Hand cane and pressed can are two distinct types of cane, though they closely resemble each other. The two are also used interchangeably to achieve a number of different patterns. The only disparity is that hand cane is woven by hand while pressed cane is done on a loom.
Wicker work is normally used in furniture and basket weaving. Cane on the other hand, is used the world over and is applied in weaving baskets for hampers, beautifying chairs using seagrass. It is also used in beds of varying sizes for children and adults, tables and cupboards of different sizes and shapes and for walking sticks.
The next step is to apply some glue into the groove. Do not use too much of it, but just enough to cover the very rattan webbing at the very bottom of the groove. Relax as you give the glue some time to settle. This takes about five minutes.
The splint read is a flat reed that is cut from the inside part of a rattan plant. The component is applied in making numerous weaves common with the binder type. It also allows for colored splint such as oak and ash splint materials.
The reed is processed into a round, flat-oval, flat and oval-oval reed which is then packaged into typical coils of one pounds each. Unlike the glossy cane skin, the reed is porous and does accept both paint and attain. The material is excellent for woven wicker, basketry and furniture alike.
Simply put, the materials used to make obtain the caning are wide and diverse. The range of patterns is also varied and can contain different colors. However, the particular type of component to be applied is dictated by the type of seat and the cost implications.
0 comments:
Post a Comment